HTTPS
Last updated
Was this helpful?
Last updated
Was this helpful?
By self-created certificate or uploading a signed certificate, it's able to access the encoder via HTTPS, ensuring the security of communication data, and providing protection for user information and device security with reliable and stable technical means.
1.1 Go to Setting->Network->HTTPS->Check the checkbox of Enable
1.2 Click "Create Certificate" and enter below information:
Country
Country code instead of full name of country
IP/Domain
Same as the IP address of device or domain
Expiration
Days of validity, ranges from 1 ~ 5000
Province/Location/Organization/Unit
None or as you wish
Valid email address
1.3 Click "Confirm"->"Install Certificate" and then it'll show as below:
1.4 Click "Download Certificate"->Save Root Certificate
1.5 Open File or Double Click the downloaded file "ca.crt"
1.6 Click the above "OK"->Click "Install Certificate"->Follow the installation guide->Select "Trusted Root Certification Authorities from the dropdown list"
1.7 Click "Next"->Completing the certificate Import Wizard
1.8 Click "Finish" and it'll pop up the window of Security Warning
1.9 Click "Yes" and it'll pop up the window of The import was successful:
1.10 Go to test whether the encoder can be accessed via HTTPS:
2.1 Double click the signed certificate you obtained from 3rd-parties->Click"Install Certificate"
2.2 Refer to the above step 1.6 ~ 1.9 to complete the installation of certificate in your PC;
2.3 Click "Enable"->Browse Signed Certificate & Keys->Upload Signed Certificate & Keys
2.4 Once completed, just click "Save" to make it valid.
2.5 Then it's necessary to do port mapping and make sure the encoder is linked to the domain bonded with the signed certificate. After that, it should be no problem to access the encoder by https://domain:port instead of the default static IP address.
