Video Encoder Pro
  • About EXVIST
  • 📌GETTING STARTED
    • Introduction
    • Changelog
    • Quick Start
      • 1️⃣Connection Diagram
      • 2️⃣Download & Run
      • 3️⃣Configure IP
      • 4️⃣Access Encoder
      • 5️⃣Configure Video
      • 6️⃣Configure RTMP
    • Aerial Video
  • 🛠️Tools
    • EncDeviceTool
      • Download
      • Quick Start
    • ActiveX
  • ✨SETTING
    • Preview
    • System
      • System Setting
      • Date & Time
      • System Info
      • Uart Transmit
      • Maintain
    • Video/Audio
      • Audio
      • Video
      • OSD
      • Image
    • Network
      • TCP/IP
      • DDNS
      • WIFI
      • HTTP
      • HTTPS
      • RTSP
      • Multicast
      • Unicast
    • Push
      • RTMP
      • SRT
    • Storage
      • Storage
      • Record
      • View Record
    • Security
  • 📺FUSION
    • Model Comparison
    • ⏮️Preview
    • System
      • System Setting
      • Channel
      • Date & Time
      • System Info
      • Maintain
    • Video/Audio
      • Audio
      • Video
      • OSD
      • Image
    • Network
      • TCP/IP
      • DDNS
      • HTTP
      • HTTPS
      • RTSP
      • Multicast
      • Unicast
    • Push
      • RTMP
      • SRT
    • Storage
      • Storage
      • Record
      • View Record
    • Security
      • User
  • 📤Upgrade
    • Upgrade Firmware
  • 🎆RESOURCES
    • 🤔FAQ
      • EDID
      • Preview
      • Network
        • TCP/IP
        • WIFI
        • HTTP
        • RTSP
        • RTMP
        • Latency
      • Video/Audio
        • Audio
        • Soundtrack
      • Storage
      • Security
      • Upgrade
      • Latency Test
      • Log
    • Official Store
    • YouTube Channel
  • 🎨Application
    • ONVIF
    • OBS
    • SmartPSS
    • vMix
    • XSplit
    • Wowza
    • YouTube
Powered by GitBook
On this page
  • Why does it show like the below?
  • Why does it show "Video Loss"?
  • How can we preview video in H.265?

Was this helpful?

  1. RESOURCES
  2. FAQ

Preview

PreviousEDIDNextNetwork

Last updated 3 years ago

Was this helpful?

Why does it show like the below?

Go to Setting->Video/Audio->Video->Change Codec type from H.265 to H.264

Why does it show "Video Loss"?

That means the encoder doesn't detect any video source and 1920x1080@30HZ will be shown from Setting->System->System Status. In this case, please follow below steps which might help you:

  • Power off the encoder;

  • Clean both connectors of HDMI cable with industrial alcohol;

  • Re-plug in the HDMI cable and power on the encoder;

  • Check whether it can detect video source;

You can learn more about EDID:

How can we preview video in H.265?

You can preview via VLC player or access the encoder from IE.

Tips: As Flash only supports H.264 instead of H.265, that's why it will show like the above photo if you're trying to preview the live video in browsers like Chrome, Edge, Firefox etc.

🎆
🤔
🧙‍♂️
EDID
Preview-Running in Circle
Video Loss