Snapshot

Snapshot

  • Go to Configuration->Video & Audio->Snapshot

Explanation

  • Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale of 1-7.

  • Frame rate: This dropdown box allows the user to select the MJPEG frame rate. Frame rate is adjusted from 1-5 FPS.

  • Interval: This is to set snapshot frequency. The value ranges from 1 to 600 seconds.

  • Stream: This dropdown box allows the user to select a snapshot of the stream: mainstream or substream.

  • MJPEG-HTTP: it shows the MJPEG-HTTP streame URL. For testing object, the user can use the example URL like the below if the user did not login the camera’s web interface: http://192.168.1.120/action/stream?subject=mjpeg&user=admin&pwd=12345

  • Snapshot URL: it shows the MJPEG snapshot HTTP URL. Normally the user need use the example URL like below if the user did not login the web interface: http://192.168.1.120/action/snap?cam=0&user=admin&pwd=12345. The IP address, User and Password showing in the above URL are factory default. Please use IPC's current IP address, user name and password to replace the content.

  • Restore Default: Restore the values to default setting.

  • Refresh: Refresh the display of the settings’ value.

  • Save: Save the setting.

PreviousVideoNextOSD

Last updated