VoIP
Last updated
Last updated
Go to Configuration->Network->VoIP
VoIP stands for Voice over Internet Protocol. This technology is used to transmit the IP video and voice between the VoIP server and the cameras. Below is a snapshot of VoIP tab.
Enable: This dropdown box allows the user to enable VoIP functionality.
Authentication: This dropdown box allow the user to enable VoIP authentication.
Server address: This field allows the user to fill out the VoIP server address.
Port: This field allows the user to fill out the VoIP server port.
Call ID: This field allows the user to fill out the camera call ID number registered.
Username: This field allows the user to fill out the username in the VoIP system.
Password: This field allows the user to fill out the password in the VoIP system.
Stream type: This dropdown box allows the user to select the stream type in the VoIP system.
Max. call duration: This field allows the user to fill out the VoIP call maximum duration time.
Restore Default: Restore the values to default setting.
Refresh: Refresh the display of the settings’ value.
Save: Save the settings.
