4️⃣Configure Video & Audio
Last updated
Last updated
Double click the IP Camera you would like to set;
Enter "User Name" (admin by default) and "Password" (12345 by default), then click "Login":
Click "Encoder" -->Video Encoder;
Key Frame set as 10 (Reference Value: users can set lower key frame if better image quality is required.);
Bitrate set as 500 (Reference Value: users can set higher bit rate to remove mosaic but it should be matched to your network bandwidth because of uplink bandwidth used.);
Check Audio Codec-->Click checkbox of Enable to enable Audio;
Encode set as AAC for audio; Input volume set as 39 or so (Reference Value: users can log into GUI and set sampling rate as 24000 or higher if better voice quality is required because the default sampling rate here is 8000.)
Click "Save"
