6️⃣Configure WiFi
Available for WiFi IP Camera Only
Last updated
Available for WiFi IP Camera Only
Last updated
Go to WIFI-->Enable-->Double click trusted SSID;
Enter password to the SSID you select above;
Enter correct password to SSID and Click "Connect"
Refresh and Current Network will be shown "Connected" below which means it's already connected to WiFi. If disconnected, please try it again or check whether MAC address of this IP camera is in the whitelist of your router.
🧙♂️ Tips: It's necessary to plug out the ethernet cable and power off the IP camera to reboot it to make WiFi valid.
