ROUTER V520S
  • About EXVIST
  • 📌GETTING STARTED
    • Introduction
    • Interfaces
    • Quick Start
  • ✨Configuration
    • Dashboard
    • Utilization
    • Interface
    • Network
      • Connection
      • LTE
      • LTE SMS
      • LTE/NR
      • LTE/NR SMS
      • LAN
      • Hosts
      • ALG
      • Time to Live(TTL)
      • Firewall
      • Port Map
      • Port Proxy
      • AP Client
      • Route Table
      • Advanced Routing
    • VPN
      • IPSEC Connection
      • OpenVPN Client
      • OpenVPN Server
      • L2TP Client
      • PPTP Client
      • GRE Tunnel
    • Wireless
      • 2.4G SSID
      • 2.4G MSSID
      • 2.4G ApClient
      • 2.4G Clients
      • 5.8G SSID
      • 5.8G MSSID
      • 5.8G ApClient
      • 5.8G Clients
      • SSID
      • Channel
      • Advanced
      • ACL
    • Station Control
      • Access Control
      • Internet Control
      • Station List
      • Station Address Bind
      • Station Wake Up
      • Station Internet Control
      • Station Access Control
      • Traffic Reference
      • Station Traffic Control
      • Default Traffic Control
    • Application
      • HW Accelerate
      • DDNS
      • Dynamic Routing
      • GNSS
      • JTT808 GPS
      • Zeroone GPS
      • HA(VRRP)
      • Remote IO
      • SNMP Agent
      • File Sharing
      • Serial#RS232
      • Serial#RS485
      • Serial#TTL
      • UPNP
      • IGMP Proxy
      • Multicast Routing
      • LTE GPS
      • Serial#1
    • System
      • Device
      • Configure
      • Software
      • Password
      • Manage Server
      • Auto Reboot
      • Telnet Server
      • SSH Server
      • Web Server
    • Debug
      • Syslog
      • Terminal
      • Diagnostic
      • AT Command(LTE/NR)
      • LED/IO Control
      • LTE Adjust
      • COM Interface
    • Development
      • SDK
      • Inittab
      • Uninittab
      • Jointtab
      • Service
      • Crontab
      • Network Frame
  • 📤FIRMWARE
    • Download
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  1. Configuration
  2. System

Auto Reboot

PreviousManage ServerNextTelnet Server

Last updated 2 years ago

Auto Reboot

In this section, it allows the user to set reboot mode. The router will run slowly for a long time. To prevent router failure, it is recommended to set the router to automatically restart. The default factory setting is idle restart, and the user can set the restart mode according to actual usage. Please check below details:

✨