ROUTER V520S
  • About EXVIST
  • 📌GETTING STARTED
    • Introduction
    • Interfaces
    • Quick Start
  • ✨Configuration
    • Dashboard
    • Utilization
    • Interface
    • Network
      • Connection
      • LTE
      • LTE SMS
      • LTE/NR
      • LTE/NR SMS
      • LAN
      • Hosts
      • ALG
      • Time to Live(TTL)
      • Firewall
      • Port Map
      • Port Proxy
      • AP Client
      • Route Table
      • Advanced Routing
    • VPN
      • IPSEC Connection
      • OpenVPN Client
      • OpenVPN Server
      • L2TP Client
      • PPTP Client
      • GRE Tunnel
    • Wireless
      • 2.4G SSID
      • 2.4G MSSID
      • 2.4G ApClient
      • 2.4G Clients
      • 5.8G SSID
      • 5.8G MSSID
      • 5.8G ApClient
      • 5.8G Clients
      • SSID
      • Channel
      • Advanced
      • ACL
    • Station Control
      • Access Control
      • Internet Control
      • Station List
      • Station Address Bind
      • Station Wake Up
      • Station Internet Control
      • Station Access Control
      • Traffic Reference
      • Station Traffic Control
      • Default Traffic Control
    • Application
      • HW Accelerate
      • DDNS
      • Dynamic Routing
      • GNSS
      • JTT808 GPS
      • Zeroone GPS
      • HA(VRRP)
      • Remote IO
      • SNMP Agent
      • File Sharing
      • Serial#RS232
      • Serial#RS485
      • Serial#TTL
      • UPNP
      • IGMP Proxy
      • Multicast Routing
      • LTE GPS
      • Serial#1
    • System
      • Device
      • Configure
      • Software
      • Password
      • Manage Server
      • Auto Reboot
      • Telnet Server
      • SSH Server
      • Web Server
    • Debug
      • Syslog
      • Terminal
      • Diagnostic
      • AT Command(LTE/NR)
      • LED/IO Control
      • LTE Adjust
      • COM Interface
    • Development
      • SDK
      • Inittab
      • Uninittab
      • Jointtab
      • Service
      • Crontab
      • Network Frame
  • 📤FIRMWARE
    • Download
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • LTE GPS
  • GPS Report
  • GPS Server
  1. Configuration
  2. Application

LTE GPS

PreviousMulticast RoutingNextSerial#1

Last updated 3 years ago

LTE GPS

In this section, it allows the user to set LTE GPS. LTE GPS is one of optional features because it uses the GPS built-in the 4G modules. If it’s required to enable GPS, please go to Network-->LTE-->GPS and enable GPS. If it positions successfully, you will see the map below. Please check below details:

GPS Report

  • It allows users to upload GPS data to the assigned server.

GPS Server

  • Once enabled, GPS data will be broadcasted via the assigned port. But for the terminal connected to the router, all you have to do is to open the corresponding port to get the GPS information.

✨