ROUTER EX2
  • About EXVIST
  • 📌GETTING STARTED
    • Introduction
    • Specification
    • Interfaces
    • Quick Start
  • ✨CONFIGURATION
    • Home
    • System Info
      • Clients info
      • Statistics
      • 4G/WAN Status
    • Wireless Setting
      • 2.4G Basic Setting
      • 2.4G Repeater
    • Network Setting
      • Work Mode Setting
      • WAN Setting
      • LAN Setting
      • DHCP Setting
      • 4G Setting
      • VPN Setting
      • Ping Reboot
    • System Admin
      • Web Access Control
      • Backup/Restore
      • Firmware upgrade
      • Time Setting
      • Reboot
      • System Log
    • Advance Setting
      • Intranet Passthrough
      • Oray Passthrough
      • DTU Setting
      • PLC Setting
      • Zerotier
      • Remote Help
      • DMZ Setting
      • Port Mapping
      • Static Route
      • MQTT
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • Clients info
  • Explanation
  1. CONFIGURATION
  2. System Info

Clients info

PreviousSystem InfoNextStatistics

Last updated 3 years ago

Clients info

  • Go to System info->Clients info->Then it allows the user to check which unit is used as wireless host and which unit is already connected to the wireless host from the ARP List:

Explanation

Wireless Host

Item
Description

MAC Address

The unique MAC address of wireless host

Signal Strength

The signal strength of Wi-Fi

RX

The bytes received

TX

The bytes sent

ARP List

Item
Description

IP Address

The unit connected to the wireless host

MAC Address

The MAC address of the unit above

Flag

Online: 0x2, Offline: 0x0

✨