# Channel

## Channel

* Go to Setting->System->Channel->Encode Channel or Decode Channel
* Add CH3->Click"Modify"->Select Protocol (SQ, RTSP, RTMP, TS\[TS, HLS])
* Enter Device Name->Device Address->Username->Password
* Click"Confirm" and then CH3 is already added successfully;

<figure><img src="https://4245975826-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fkg35R2FOXC4295wPDYgm%2Fuploads%2F1MP6TpJ6wbbhQpLtEgY2%2FTVHVE_SystemChannel.jpg?alt=media&#x26;token=aea0655c-3de8-434c-8a50-47bad8b24f17" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
SQ means the private protocol for encoders and decoders manufactured by EXVIST;
{% endhint %}

### Add RTSP Stream

#### Take IP Camera from Hikvision for Example

* Click "Modify"->Select RTSP from Protocol Dropdown List->Enter Device Name
* Enter Device Address like _**rtsp://admin:12345@192.168.1.108:554/h264/ch1/main/av\_stream**_ {Username: admin, Password: 12345}, as username and password are already embedded in the RTSP address, then it's only needed to enter username _admin_ and keep password as blank;

{% hint style="info" %}
If it's failed to decode RTSP stream of IP cameras from other brands, then we're afraid it might be needed to do integration.&#x20;
{% endhint %}

{% hint style="warning" %}
**Please note**: CH1 might not be available if all decoding channels are added. Then it's necessary to uncheck the checkbox of CH1 to save all channels successfully.
{% endhint %}
